Making Do Monday - Cover Those Stains

Somehow with all the holiday hullabaloo, I just forgot about Making Do Mondays. I promise to at least try to do better:)

We're a messy house...clementine juice running down our arms, paint splattering across our chests, garden soil ground into the knees of our pants. It just happens. We seem to have no control over it. So we make do:)


Both of these shirts featured lovely stains on the front (strawberry and chili if I'm not mistaken).

A quick sketch, a light iron to fuse, and a few rounds through the sewing machine and they were good as new...actually, better than new!

All you need are a few scraps of fabric and some of this.

Making Do Monday - TREASURE PANTS

AKA - Lots of Pockets Pants, Pocket Pants, Mountain Pants, Who Needs a Bag? Pants, and my personal favorite Acorn Pants (because that's what Belle always fills her pockets with:).

I used this pattern from here. It's unisex and couldn't be easier to put together...it's only TWO pieces! But, you could use any comfortable pants pattern that you have.




For the pockets, I used every pocket tutorial, design and/or pattern I could think of and went a little crazy. There are 8 pockets on the finished pants. I originally cut out 12, but 2 covered too much of the flower print, and 2 others seemed to be too far away from little hands to really be of much use.

And why is this a Making Do Monday project? Well, for me...it's because everything I used came from my stash. You might not have a yard of luscious, soft, velvety, baby-wale corduroy in your stash, but you can find it here. Mine is "Lipstick," but there are tons to choose from. The pockets are definitely stash raiders! Find some random scraps and start cutting:)

I even had to "make do" with my elastic! I didn't have any 1/2" elastic and really wanted these pants finished in time for Belle to wear to the mountains, so I stitched two long pieces of 1/4" elastic together...I do NOT recommend that you make do quite this much, but I was desperate!

Plenty of space to stuff with acorns, flowers, leaves, rocks etc.

Maybe I should have made the elastic tighter so the treasures don't pull the pants right off the kid!

Making Do Monday - Shell Collecting Bag

First, let me apologize for skipping Making Do Monday last week. This is where I was...

Watching this...

And more of this...

And some of this...
So once again, I'm sorry...so sorry!

But, at least I road-tested this week's project:)

Belle has a thing for bags...and HOARDING! So the night before we left for the beach, I thought she might like a new vessel for collecting shells. I raided the stash as usual and here's a quick how-to for a Shell Collecting Bag (or rock/leaf/flower/stick/gum wrapper/fabric scrap/ collecting...we've done it ALL!).

Finished Bag measures approximately 10"x12".

You will need:

Fabric Scraps

Cotton Quilt Batting Scraps

All seam allowances are 1/2" unless otherwise noted.

1. Cut pieces.

Outside: Cut two 10.5"x9.5" (top sections-Fabric A). Cut two 10.5"x3.5" (bottom sections -Fabric B).

Batting: Cut two 10.5"x13"

Inside: Cut two 10.5"x13.5" (Fabric C)

2. Make Outside Panels: Assemble one panel at a time. Sew one piece of Fabric A to one piece of Fabric B along 10.5" side. Press open. Top stitch close to seam. Place panel on one piece of batting. Be sure to line panel up with bottom edge of batting. Machine quilt in desired pattern. I simply stitched diagonal lines zigzagging back and forth across the panels. Repeat for second panel.

3. Assemble Outside: Place two panels right sides together and stitch down both sides and across bottom. Flatten corners and sew across to "box" the bottom of the bag. Clip excess fabric out of corner. IF YOU'VE NEVER "BOXED" THE CORNERS OF A BAG, YOU CAN SKIP THIS STEP...OR WAIT FOR A BOXED CORNER TUTORIAL COMING LATER THIS WEEK!

4. Assemble inside: Place two Fabric C panels right sides together. Sew down both sides and across bottom. Flatten corners and sew across to "box" the bottom. Be sure to sew at same distance from corner as you did for the outside. Clip excess.

5. Create straps: Cut two 3" wide LONG strips (I used remnants from my window treatments:). Drape these across your child (or yourself if you are making a bag for you) and cut them to the desired length. I left mine pretty long so the bag could grow with Belle. Place the strips right sides together and sew down both of the long edges. Turn strap right side out and press. Top stitch both edges.

6. Attach Strap: Place strap on one side of outer part of bag with right sides together and sew using 1/4" seam allowance. Flip strap to other side and repeat. If you pick the bag up by the handle you should be able to see what it will look like when it is finished. Be sure your strap isn't twisted!!!

7.. Assemble bag: Turn outer bag right side out and slip down inside inner bag. Right sides should be facing each other. Line up end seams and pin bags together all around top edge. Be sure strap is completely tucked down in between the layers. Sew around the edge leaving a 3" opening for turning. Turn bag right side out and stuff liner down inside outer bag. The liner is slightly taller than the outer bag so it should form a pretty little border almost like quilt binding around the top. Press a crease into this top edge. Fold the strap up into place and press well. Top stitch at top and bottom edges of liner border. You will be top stitching over the outside of your strap securing it in place.

DONE! Now go collect something:)

Making Do Mondays - Basic School Skirts

I spent an entire afternoon, a couple of weeks ago, taking inventory of the girls' closets and drawers. I pulled out all the hand-me-downs and last fall's clearance purchases for Bee and dug out all the spring clothes that I thought might still fit Belle. I laid them out all over each respective child's floor (I should have taken a picture of THAT!) and made a list of what was missing. Here's my list:

Bee: NOTHING! Between Belle's hand-me-downs and the super amazing deals I found at the end of the season last year she has pretty much everything she is going to need this fall. I'm sure she'll get a few new appliqued long-sleeve onesies too, since there just happen to be several in her size waiting in my stash, but all in all, she's set:):):)

Belle: Long-sleeve tees, leggings in basic colors, warm "comfy" pants in basic colors, and heavier "comfy" skirts. We don't even bother to buy this kid jeans anymore because she flat-out refuses to put them on...I'm still wondering whose kid this really is!

Thanks to a neighbor who "drug" me out to the outlets at 9pm on tax-free weekend (she really had to twist my arm!), the tees, leggings, and pants were taken care of in less than an hour...primarily because the stores closed at 10:) But there was still the issue of the skirts that are Belle's preferred daily attire.

So I MADE DO!

I raided the fabric stash and cut out a gazillion skirts. I was amazed at all the fun fabric combinations I was able to come up with. And because a size 3T skirt takes less than half a yard, I could have kept cutting for days. But since, I actually had to sew all of them I decided that 10 was my limit...yeah, I know that's a little ridiculous, but she LOVES skirts and I LOATHE doing laundry.

So here's the basic tutorial for the skirts.

1. Measure the length that you want the skirts to be. In our case, 11 inches from waist to the middle of the Belle's knee.

2. Add 3 inches (1.5" for hem and 1.5" for elastic casing). This is the total length of fabric that you will need for the skirt. In our case 14". Commit that number to memory and you can start playing.

3. Basic skirt:

a. For a basic skirt, cut a piece of fabric that is 14" long and the width of the fabric. Be sure that you have trimmed the selvage off.

b. Fold the fabric hamburger-style with right-sides together. Sew using 3/8" seam allowance down the short side.

c. Turn right side out and press in hem and elastic casing. To do this, along both the top and bottom edges, first fold in 1/2" and press. Then fold in another 1" and press.

d. Hem the skirt on the bottom edge. I like to add two rows of stitching just because it looks a little more professional.

e. Stitch the bottom edge of the elastic casing, leaving a 1" gap to insert elastic.

f. Use a safety pin to thread elastic through the casing. Elastic should be 1-2" smaller than your child's waist.

g. Sew ends of elastic together and tuck into casing.

h. Finish stitching last 1" of casing closed.

DONE!

4. For Hem-Band Skirt (see Cow example):

a. Cut main skirt piece that is length minus 3 (in our case 14-3=11) inches by the width of the fabric.

b. Cut hem band that is 7 inches by width of the fabric.

*** At this point, be sure that your hem band and skirt pieces are EXACTLY the same width. You may need to trim one a little.

c. Fold hem band in half hot dog style (or lengthwise) and press fold well.

d. Make skirt using Basic skirt directions, but omit hem.

e. Open fold of hem band and refold hamburger style with right sides together.

f. Stitch short sides together to form a large cylinder. Be sure to use the same seam allowance that you used in making the body of the skirt. Refold hot dog style with wrong sides together.

g. Slip skirt into hem band with raw edges matched and folded edge up toward top of skirt.

h. Sew around skirt 1/2" above raw edges. Finish raw edges with tight zigzag stitch or serger.

i. Fold hem band down into place and press well.

j. Top stitch just above hem band, all the way around the skirt.

DONE!

5. For Skirt with Pockets:

a. Make skirt using Basic Skirt Directions.

b. For EACH pocket - cut 2 rectangles 1" bigger than your desired pocket size (you can make the pockets any size you want). If you are making 2 pockets, then you need 4 rectangles.

c. For each pocket, put the 2 pieces right sides together and stitch all the way around the 4 sides, leaving about 2" open for turning.

d. Turn each pocket ride side out and press.

e. Pin pockets in place on skirt. PIN WELL!!!! Be sure that the opening in the seam is on any side of the pocket EXCEPT the top. It will get stitched closed when you attach the pocket.

f. Sew around the two sides and bottom of the pocket. I like to backstitch a few times on both of the top corners so they are less likely to pull away from the skirt when little hands and shoved down in there.

DONE!

You can continue making variations...patchwork, stripes, pocket styles, etc. until your stash is destashed or your machine is kaput:) Just stick to the length measurement that you committed to memory at the beginning of the process and have fun!


Giving Credit Where Credit is Due: The artwork on the pocket skirt is NOT my original creation. I borrowed the design from hola.etsy.com which sells adorable hand-carved stamps. I fell in love with this Super Girl, but preferred embroidery to stamped design for this particular project. I never intended to display her, sell her, advertise her etc. and only shared her today to illustrate the pocket design.

Making Do Monday - Birthday Bash!

It's Making Do Monday again and we just happen to be celebrating Bee's 1st birthday, so I thought a Birthday Bash theme would be appropriate:)

On Wednesday of last week I realized that little Bee's birthday party was on Saturday and, well....ummmm....I was TOTALLY unprepared. I had made no plans, bought nothing, made nothing, and was basically in denial of the fact that my baby was turning 1. It was time to get busy!

Belle helped me decided on a theme. Can you guess????

DINOSAURS!

In our family, we don't do big parties with lots of little munchkins until the age of 3 (totally arbitrary rule that we created completely on accident, but we like it, so we're sticking with it), so I didn't need crazy numbers of things to occupy 20 little tyrannosauruses. Just a few party favors for the kids in our life who qualify as "family" even if they aren't actually related. The backyard, all the new toys, not to mention the pizza and cake would provide plenty of entertainment.

We decided that a dinosaur party needed to be green, but then added in a little pink to make it more girly. I raided the stash and came up with a pile of pink and green fabric that was taller than Bee. During nap on Wednesday I drew a few big dino pictures for Belle to color while I cut out all the things we would be making (more on the magic dino pics in another post) .

After 2 days of cutting, pinning, sewing and stitching we were able to put together an entire party with just the things on hand. That's Making Do at its best, if I do say so myself!

As always, if your stash isn't as generous as mine, all the directions below include general guidelines for what you might need to buy.

Table Bunting:

You will need - lots of pieces of fabric (you can make as many flags as you want in as many different fabrics as you want...mine has 15 flags of 15 different fabrics all backed in white), a long piece of ribbon

1. Create a triangle pennant pattern. I did this with a large sheet of paper. Fold the paper in half hot dog style but crease only about one inch at the edge of the paper. Make a small mark at the very edge of the paper right on your crease. That mark will be the bottom point of your pennant. Then using a straight edge, draw a line connecting that point to each of the top corners of the paper. Cut the excess smaller triangles off and discard (or give to your child to color).

2. Trace your pattern onto the backsides of your fabric pieces. You will need TWO triangles for each flag. You can make the front and back match or pick coordinating fabric for the back sides (I just used white).

3. Place each pair of traingles right sides together and pin down the two long sides.

4. Sew down the two long sides of each traingle, then clip the point at the bottom off (be careful not to clip your stitches) and turn the flag right side out.

5. Press the flag and, if necessary, trim so that the top (RAW) edge is straight.

6. Line the flags up and put them in the order you want them to hang. My flags are all about 1 inch apart. Place the ribbon over the top edge of the flags and pin in place. Be sure that the raw edges do not show above the edge of the ribbon.

7. Use a wide zigzag stitch to sew each flag to the ribbon. If you are using satin ribbon, as I was, it is easier to sew each flag on separately and clip the threads between each one. If you are using grograin ribbon you can sew one long stitch line down the entire ribbon.

8. Be sure to clip any loose threads or strings from the raw edges.

Your bunting can be secured with packing tape to your table, high chair, or mantel. It can also be tied to deck rails, fence posts etc. for an outdoor party.

Gift Bags:

You will need - large rectangle of fabric (2 per bag), ribbon or cord

1. Decide how large your finished bag needs to be. Mine are 12x16, but you will not likely need one that large for most types of party favors.

2. Add seam allowances...this is a bit of tricky math so I'm going to show you mine:

a. Double the length 16x2=32

b. Add 2 inches to the length for foldover 32+2=34

c. Add 1/2" to the length for seam allowance 34+1/2=34.5

d. Add 1 to the width for seam allowance 12+1=13

e. Cutting measurements are now 13x34.5.

3. Cut TWO rectangles for each bag.

4. Place the two rectangles right sides together and using a 1/4" seam allowance, sew all the way around the edges leaving a 4" opening for turning.

5. Clip the corners and turn the bag right side out. Press flat and be sure to press the raw edges of the opening under so they will be sewn closed in the next step. Fold the short ends down 1" to form the ribbon casing and press in place. Then fold the bag in half hamburger style and press...you will now see what your finished bag will look like.

6. Sew across the bottom edges of the ribbon casing. Then, using a 1/4" seam allowance, sew down the two sides of the bag from the bottom edge of the ribbon casing to the bottom of the bag. DO NOT SEW THE RIBBON CASING CLOSED!

7. Cut a piece of ribbon that is the width of your bag + 6 x 2 (12+6=18, 18x2=36, so cut 36" of ribbon). Use a safety pin to thread it through the ribbon casing. Tie the two ends of the ribbon together in a small knot. If you are adding a bag tag - wait to tie the ends together until after you have put it on.

Bag Tags:

You will need - small scraps of felt, embroidery thread, small piece of ribbon

1. Draw the shape of your tag on a piece of paper and cut it out. Use this to trace a front and back for each tag you want to make. Mine were dinos, of course.

2. Cut out an initial for each tag if desired.

3. Stitch the initial (or other design) to the front of the tag. I used a back stitch, but you can just use a regular running stitch if you want.

4. Put the front and back together WRONG SIDES TOGETHER. Fold a small piece of ribbon in half and insert the raw edge end between the two layers of felt at the top of the tag. Pin in place. Stitch around the outside edge being careful to use neat, even stitches.

5. Slip the ribbon loop over the ribbon of your gift bag and then tie the bag ribbon ends together.

Softies:

You will need - fabric scraps, felt scraps, stuffing, embroidery thread

1. Design a simple outline on paper. Cut out your pattern and use it to cut two pieces for each softie. Use felt to design embellishments if desired (eyes, spots, spikes etc.). You will need to stitch all embellishments to each piece before putting the softie together. Things like plates or spikes will be sewn in during the final construction step. You can also embroider eyes, patterns etc. at this point.

2. Place the two pieces right sides together and pin. If you are adding spikes they will need to point down into your sandwich and be tucked in completely before sewing. Sew all the way around your softie leaving a 2-3 inch opening to turn.

3. Turn your softie right side out (your spikes will stick up now) and stuff well. Fold the edges of the opening under and slip stitch the opening closed.

Applique T-Shirt: I decided to try to protect the party dress (I'll do a dress post later...I think you'll LOVE it!) from the mounds of cake icing, so I put this together for Bee to wear while she ate her cake.

You will need - a oneise or tee (I keep a stock of the plain white Carters onesies in my stash, but you might need to buy one of these), fabric scraps, iron-on fusing paper (available at craft stores)

1. Draw out your design on plain paper. Be sure that it fits on your tee.

2. Trace each individual piece on the iron-on paper. This will actually end up as a mirror-image, so if you are doing a name or something else that is direction specific, be sure that you create a mirror image of what you want the finished project to look like.

3. Cut around each piece...you don't need to cut on the lines at this point, just cut close to your piece.

4. Place each piece on the WRONG side of the fabric that you have chosen for that part. Follow the package instructions to iron onto the fabric. Now you will need to craefully cut all of the pieces out on the lines you drew.

5. Peel the backs off of all of your pieces and arrange them on your tee. Follow the package instructions again to iron the pieces to your tee.

6. Use a straight or zigzag stitch to sew around the edges of all of your pieces. When you need to make a sharp turn, be sure that your needle is all the way down in your fabric, then lift the presser foot, turn your fabric, and put your presser foot back down before continuing to sew. If you have a lot of small pieces it is easier to use a straight stitch. Large, simple pieces look cute with a zigzag.

TIP - you can use the hand wheel on your sewing machine to sew one stitch at time in small sections if necessary.

Add some ballons and a few pizzas and have a blast at your birthday bash!

Making Do Monday - Fisher Boy "Shorts"

I seriously love No Big Dill...like major blog crush! So when I saw this tutorial that Katy created, I just had to try it out...that night:)

http://www.maryjanesandgaloshes.com/2010/08/making-your-own-patterns-with-no-big.html

In honor of my goal to "make do" as much as possible, I raided the stash. This Red Letter Day fabric has been hanging around for months. I've used bits and pieces for small projects, but still had some serious yardage left...it's perfect for that summer to fall transition, don't you think???

Now you must know, I sew at night. That means that all fitting is done through estimation and sometimes comparison to other articles of clothing, but NEVER to the actual child who will wear the item. For these, I pulled out my favorite pants pattern...size 1 year. Bee is only a few days away from being 1, so that seemed to make sense. Then I shortened the pattern by about 6 inches to get a capri length (and lose the extra hem allowance, since I didn't need any for these "shorts."

Well you can see that apparently we grow 'em really short around here, but they're still super cute PANTS...and she'll be able to wear them for at least a year:)

Making Do Monday - Beads in Our Hair

Belle loves hair clips, pony tails, and all things bling for her mane. But, the little snap clippies from the discount store are starting to feel like "baby" clips, so we felt an upgrade was in order.

These beaded bobby pins are perfect for tucking those bangs back out of her face (where they are 99% of the time since she refuses to let me tuck her hair behind her ears!).

Super simple....and yep, we're making do, so we found all of our supplies in the playroom closet!

You'll need:

thin beading wire

bobby pins

small beads

wire cutters or scissors

those round nose beading pliers are super helpful, but not necessary

For the sake of easy directions, let's call the rounded end of the bobby pin the "back". And the end that you open up to slip your hair in is the "front".

Twist the wire around the back end of the pin (be sure you are only twisting around the ridged prong of the pin...don't tie your pin closed with wire please) 5 times. Slip a bead on to the wire and push it all the way down to the twists you just made. Pull the wire tight and twist it around the ridged prong 3 more times. Repeat for a total of 4-5 beads. Finish off by twisting around the pin 5 more times. Clip your wire and pinch down the sharp end. Voila! Big girl hair accessory complete.

Making Do Monday - Fleece Hat and Scarf

Introducing: Making Do Mondays on Belle + Bee

Making Do Monday is all about making do with what you have. This is a tough concept for me!!!! When I dream up a new project, the first thing I do is plan a trip to the "projects" store (Belle's name for our local craft and fabric stores). My goal for this new feature on Belle + Bee is that I will learn to make-do with the gazillion yards of fabric that I already have. Now if you stash isn't quite as massive as mine, don't worry...all the projects can be completed with purchased materials. But I would encourage you to try to make-do with me, as much as possible:)

Each week (I HOPE!) you will find a tutorial for a simple project that I made totally out of things I found in my house and stash.

First up...Fleece Hat and Scarf! Belle got a new coat for fall, and as I was actually on my way to the projects store to get yarn to crochet a hat, I remembered the pile of fleece I had collected a couple of years ago. And Making Do Monday began:)

On a difficulty scale of 1-4 thimbles, this is about a 0.5:)

You will need a large piece of fleece fabric and some thread. This can be made by hand or machine. Assuming you don't have a large box of fleece in your closet like me, then purchasing a yard of fleece will be more than enough for an adult-size hat and scarf.

HAT:

Cut the selvage edge off of the fleece. This is your new measuring tape (I was too lazy to go dig one out of the garage).

Measure the circumference of your head (or the recipient's head) at the widest point. Snip the selvage at that length so that you now have a strip that is exactly the same size as your noggin.

Now measure from your brow bone up to the crown of your head, add 4 inches and snip another piece of selvage.

Now use your two measurements to cut TWO rectangles of fleece. Make sure that the stretchy direction of the fleece goes with the circumference measurement (fleece only stretches in one direction and you want that to go around your head).

Fold each rectangle in half hamburger-style (you are going to match up the height-measurement sides of the rectangle). Sew the edges together using 3/8" seam allowance. You will now have 2 cylinders that you could wear like a stovepipe hat on your melon.

Turn one cylinder right side out and slip it down into the other so that right-sides are together. Match up the seams and pin the bottom edged together. Sew all the way around the bottom edge of the cylinders, connecting the two together.

Flip the cylinder so that wrong-sides are together. You can now put your hat on...it's just missing the fun fluff at the top.

Cut a very narrow strip of fleece (about 3/8" wide and 12" long). Gather the top of the hat, wrap the strip around it and tie several very tight knots.

Use scissors to fringe the top edges of the hat. Each piece of fringe on the sample hat is about 1/2" wide, but you can make them any width you would like.

DONE!

SCARF:

Cut a long strip of fleece, approximately 6" wide (you really could make the scarf any width you like). For this toddler-size scarf, I just cut across the entire width of the fleece, which I think is 58". So, my scarf is 6"x58", but you could use any measurement that fits your fabric and your recipient.

If you want an adult-size scarf, or super long scarf, or you just have a smaller piece of fleece, then just cut two lengths and sew them together.

Use scissors to create fringe along both ends. You can make the fringe as long and wide as you like. Mine is 1/2" wide x 4" long.

DONE!

PLEASE DO NOT EVER USE PICS OF MY KIDDOS!!!! I really don't like to post them at all, but on occassion it seems necessary for a post. I love them and want to protect them, so please respect this request!